Pour 4.75L (1.25 gallons) of GU80-1 Liquid
Admixture into a clean 19L (5 gallon) plastic
2. Add one 21kg (46lbs.) bag of GU80-1 Custom
Top Coat powder. Mix thoroughly for 3 to 4
minutes, with a Wind-lock B-M1 mixing blade, or
equivalent, powered by a 13mm (1/2”) variable
speed drill, capable of producing 1000 RPMs.
TIP: In areas subject to extremely dry, and/or hot
climates, it may be necessary to add water (up to
.47L [1 pint] per mix. In order to avoid flash drying
it may be necessary to chill the GU80-1 Liquid
Admixture, before mixing. Proper ventilation
masks should be worn at all time when working
with all Pli-Dek Products. Pli-Dek products must
be stored in the shade to prevent overheating and
reduction of pot life.
3. If colored GU80-1 Custom Top Coat is required,
a Pli-Dek recommended tint pack may be added
to the mix to achieve the desired color. Note:
Ensure that all colorant is dispersed out of the
All mixes must be consistent (use the same mix
ratios) to maintain color consistency.